Tivoli Header
IBM Tivoli Storage Manager: Messages
This section contains code descriptions for possible I/O error messages
from the Tivoli Storage Manager server for the AIX and Windows NT(R)
operating systems.
- Code
- Description
- OP
- I/O operation that failed. Some possible values displayed
are:
- CC
- I/O completion code. This value is returned by the device driver to
the server when an error occurs. See Completion Code and Operation Code Values for a list of completion codes. Refer to the IBM
TotalStorage Tape Device Drivers Installation and User's Guide for
information on tape library system calls and error description for the library
I/O control requests.
- KEY
- Byte 2 of the sense bytes from the error. The following lists some
definitions:
0 = no additional sense bytes available
1 = recovered error
2 = not ready
3 = medium error
4 = hardware error
5 = illegal request
6 = unit attention (for example, a SCSI bus reset)
7 = data protect
8 = blank check
9 = vendor specific
A = copy aborted
B = aborted command
C = equal compare on SEARCH DATA command
D = volume overflow
E = miscompare
F = reserved
- ASC/ASCQ
- Additional sense codes (ASC) and additional sense code qualifiers (ASCQ)
are bytes 12 and 13 of the sense bytes. You should refer to the sense
byte number along with the value for a complete description of the common
values of the ASC and ASCQ codes. The drive or library reference manual
provided with the device usually contain tables explaining the values of the
KEY, ASC, and ASCQ fields. Common Values for ASC and ASCQ Codes also provides additional information on the common values of
ASC and ASCQ.
[ Top of Page | Previous Page | Next Page | Table of Contents ]