The messages in this section are for the Data Protection for Oracle. The messages begin with the prefix ANU and are listed in numerical order.
ANU0003S | An internal processing error has occurred. |
Explanation: An internal processing error has occurred.
System Action: Processing ends.
User Response: Retry the operation. If this error persists, contact your service representative.
ANU0004E | An unknown error has been detected. |
Explanation: An internal processing error has occurred that prevents the generation of a message for a return code.
System Action: Processing continues.
User Response: Retry the operation. If this error persists, contact your service representative.
ANU0005E | Out of memory. Stop other processes and try the operation again. |
Explanation: The machine has run out of memory.
System Action: Processing continues.
User Response: Close unnecessary processes and try the operation again.
ANU0053E | License file (licensefile) could not be opened. |
Explanation: An attempt to read from the license file failed.
System Action: Processing ends.
User Response: Install the product again. This ensures that the correct license file is installed.
ANU0054E | Read failure on license file (licensefile). |
Explanation: An attempt was made to read from the license file. This attempt failed.
System Action: Processing ends.
User Response: Reinstall the product. This will ensure that the correct license file is installed.
ANU0055E | Write failure on license file (licensefile). |
Explanation: An attempt to write to the license file failed.
System Action: Processing ends.
User Response: Make sure enough space exists on the workstation to write to the license file. If enough space exists, run the command again.
ANU0056E | Data in the license file (licensefile) is not in a valid format. |
Explanation: An attempt to read information from the license file failed.
System Action: Processing ends.
User Response: Install the product again.
ANU0057E | The checksum in the license file (licensefile) does not match the license string text. |
Explanation: An attempt was made to read information from the license file. The checksum was not valid so it appears that the license file is not at the correct level.
System Action: Processing ends.
User Response: Reinstall the product.
ANU0058E | The 'Try and Buy' license has expired. |
Explanation: This 'Try and Buy' license that was detected has expired.
System Action: Processing ends.
User Response: This product is no longer valid for use. A valid license must be obtained before running the product.
ANU0100E | Incomplete command: |
Explanation: This message displays the incomplete command that was entered.
System Action: Processing ends.
User Response: Re-enter the complete command.
ANU0101E | Invalid argument: |
Explanation: This message displays the command that was entered, up to and including the invalid command or option argument that was detected.
System Action: Processing ends.
User Response: Re-enter the command specifying a valid argument for the command or option.
ANU0102E | Invalid command: |
Explanation: This message displays the invalid command that was entered.
System Action: Processing ends.
User Response: Re-enter a valid command.
ANU0103E | Invalid option for the specified command: |
Explanation: This message displays the command that was entered, up to and including the option that was detected as invalid for the command.
System Action: Processing ends.
User Response: Re-enter the command specifying valid command options.
ANU0104E | Invalid option: |
Explanation: This message displays the command that was entered, up to and including the invalid option that was detected.
System Action: Processing ends.
User Response: Re-enter the command specifying valid command options.
ANU0105E | Missing argument: |
Explanation: This message displays the command that was entered, up to and including the command or option whose required argument is missing.
System Action: Processing ends.
User Response: Re-enter the command specifying a valid argument for the command or option.
ANU0132W | Tracing could not be started. Processing will continue. |
Explanation: A problem prevented tracing from beginning.
System Action: Processing will continue with the command entered.
User Response: Refer to the other messages that display with this message to determine the problem.
ANU0133W | Could not locate installation directory. Attempting to continue... |
Explanation: An attempt was made to read the registry to determine where the Tivoli Data Protection application client was installed. This attempt failed.
System Action: Processing will continue with the command entered.
User Response: There should be other messages along with this one. Refer to the other messages to determine the problem. If the problem can not be determined, it may be necessary to reinstall the application client code. This will ensure that the registry entries are set up correctly.
ANU0134W | Could not locate log directory. Processing will continue... |
Explanation: An attempt was made to read the registry to determine where the Tivoli Data Protection application client log is located. This attempt failed.
System Action: Processing will continue with the command entered.
User Response: There should be other messages along with this one. Refer to the other messages to determine the problem. If the problem can not be determined, it may be necessary to reinstall the application client code. This will ensure that the registry entries are set up correctly.
ANU0150I | Operation canceled by user. |
Explanation: The user has requested that the Data Protection for Oracle application client end by entering ctrl-C.
System Action: Processing ends.
User Response: None
ANU0151E | Errors occurred while processing the request. |
Explanation: Attempting to process the request entered, an error occurred.
System Action: Processing ends.
User Response: Attempt to determine the source of the errors from viewing the log file. Correct the problems and try running the command again.
ANU0152I | Performance stats: seconds seconds spent in apicall API calls |
Explanation: The indicated number of seconds were spent making API calls for the indicated system.
System Action: Processing continues.
User Response: None
ANU0153I | Performance stats: seconds seconds spent in function |
Explanation: The indicated number of seconds were spent the named function.
System Action: Processing continues.
User Response: None
ANU0154E | The Data Protection for Oracle application client cannot work with the version of the Tivoli Storage Manager API you have installed. Please install version version.release.level or greater. |
Explanation: The version of the Tivoli Storage Manager API currently installed on the system is older than the version used to build the Data Protection for Oracle application client.
System Action: Processing ends.
User Response: Install a version of the Tivoli Storage Manager API at or later than the indicated level. A copy is distributed with the Data Protection for Oracle application client.
ANU0155E | The Data Protection for Oracle application client cannot work with the release of Tivoli Storage Manager API you have installed. Please install release version.release.l evel or greater. |
Explanation: The release of the Tivoli Storage Manager API currently installed on the system is older than the release used to build the Data Protection for Oracle application client.
System Action: Processing ends.
User Response: Install a release of the Tivoli Storage Manager API at or later than the indicated level. A copy is distributed with the Data Protection for Oracle application client.
ANU0156E | Could not load the Tivoli Storage Manager API. |
Explanation: The Tivoli Storage Manager API could not be loaded.
System Action: Processing ends.
User Response: Ensure the Tivoli Storage Manager API is correctly installed. Run the Data Protection for Oracle application client with the /TRACEFLAGS=API /TRACEFILE=filename options and view the tracefile to determine why it could not be loaded. Another possible cause is that the TSMAPI.DLL does not exist in the system directory. Re-install the Tivoli Storage Manager API, if this is the case.
ANU0160E | An authentication error occurred with your stored Tivoli Storage Manager password. |
Explanation: You were unable to log on to the Tivoli Storage Manager server due an authentication error.
System Action: Processing stops.
User Response: The stored Tivoli Storage Manager password may have become corrupted. Contact your Tivoli Storage Manager server administrator.
ANU0161E | Authentication error. The password entered is not valid. You are not logged on to the Tivoli Storage Manager server. |
Explanation: An incorrect password was entered.
System Action: Processing stops.
User Response: Enter the correct Tivoli Storage Manager password and try again.
ANU0162E | The passwords entered do not match. Please enter them again. |
Explanation: An incorrect password was entered.
System Action: Processing stops.
User Response: Enter the passwords again.
ANU0163E | The directory path needs to be fully-qualified. |
Explanation: The /intopath option was specified without a fully-qualified path.
System Action: Processing stops.
User Response: Enter the command again and specify a fully-qualified path in the /intopath option.
ANU0167E | The fully-qualified file name is too long. |
Explanation: An attempt was made to use a fully-qualified file name that was too long. This attempt failed.
System Action: Processing ends.
User Response: None
ANU0200E | File (filename) could not be opened for reading. |
Explanation: An attempt was made to open a file for reading. This attempt failed.
System Action: Processing ends.
User Response: None
ANU0201E | File (filename) could not be opened for writing. |
Explanation: An attempt was made to open a file for writing. This attempt failed.
System Action: Processing ends.
User Response: None
ANU0202E | Read failure on file (filename). |
Explanation: An attempt was made to read from a file. This attempt failed.
System Action: Processing ends.
User Response: None
ANU0203E | Write failure on file (filename). |
Explanation: An attempt was made to write to a file. This attempt failed.
System Action: Processing ends.
User Response: None
ANU0204E | File (filename) could not be closed. |
Explanation: An attempt was made to close a file. This attempt failed.
System Action: Processing ends.
User Response: None
ANU0205E | File (filename) statistics could not be obtained. |
Explanation: An attempt was made to obtain file statistics. This attempt failed.
System Action: Processing ends.
User Response: None
ANU0206E | Directory (directory) could not be created. |
Explanation: An attempt was made to create a directory. This attempt failed.
System Action: Processing ends.
User Response: None
ANU0207E | Directory path (directorypath) is too long. |
Explanation: An attempt was made to use a directory path that was too long. This attempt failed.
System Action: Processing ends.
User Response: None
ANU0208E | There is not enough disk space for the operation attempted. |
Explanation: An attempted operation required more disk space than was available. The attempt failed.
System Action: Processing ends.
User Response: None
ANU0209E | The rename of file (filename1) to (filename2) failed. |
Explanation: An attempt was made to rename a file. This attempt failed.
System Action: Processing ends.
User Response: None
ANU0210E | The Tivoli Storage Manager high level qualifier is too long. |
Explanation: An attempt was made to use a Tivoli Storage Manager high level qualifier that was too long. This attempt failed.
System Action: Processing ends.
User Response: None
ANU0211E | The Tivoli Storage Manager low level qualifier is too long. |
Explanation: An attempt was made to use a Tivoli Storage Manager low level qualifier that was too long. This attempt failed.
System Action: Processing ends.
User Response: None
ANU0212E | The Tivoli Storage Manager filespace name is too long. |
Explanation: An attempt was made to use a Tivoli Storage Manager filespace name that was too long. This attempt failed.
System Action: Processing ends.
User Response: None
ANU0213E | The maximum number of objects allowed per Tivoli Storage Manager transaction is t oo small. |
Explanation: In order to maintain backup data integrity, multiple backup objects are sent to the Tivoli Storage Manager server in a single transaction. The Tivoli Storage Manager server has indicated that the maximum number of objects allowed per transaction is less than the minimum required by the Data Protection for Oracle application client.
System Action: Processing ends.
User Response: Increase the maximum number of objects allowed per transaction on the Tivoli Storage Manager server and retry the operation.
ANU0214E | The backup object's management class backup copy group does not exist. |
Explanation: The Tivoli Storage Manager server has indicated that the backup object's management class backup copy group does not exist.
System Action: Processing ends.
User Response: Contact your Tivoli Storage Manager server administrator.
ANU0215E | All backup objects do not have the same management class backup copy destination. |
Explanation: In order to maintain backup data integrity, multiple backup objects are sent to the Tivoli Storage Manager server within a single transaction. All backup objects within a single transaction are required to have the same management class backup copy destinations.
System Action: Processing ends.
User Response: Contact your Tivoli Storage Manager server administrator.
ANU0216E | Unable to obtain space information for volume (volumename). |
Explanation: An attempt was made to obtain space information for a volume. This attempt failed.
System Action: Processing ends.
User Response: None
ANU0217E | The Tivoli Storage Manager filespace name is invalid. |
Explanation: The filespace name or directory delimeter is invalid.
System Action: Processing ends.
User Response: Check that the filespace name length, characters, and directory delimeters are valid.
ANU0218E | The Tivoli Storage Manager high level qualifier is invalid. |
Explanation: The high level qualifier name or directory delimeter is invalid.
System Action: Processing ends.
User Response: Check that the high level qualifier name length, characters, and directory delimeters are valid.
ANU0219E | The Tivoli Storage Manager low level qualifier is invalid. |
Explanation: The low level qualifier name or directory delimeter is invalid.
System Action: Processing ends.
User Response: Check that the low level qualifier name length, characters, and directory delimeters are valid.
ANU0256E | The password in your Tivoli Storage Manager options file has expired. Please change your password on the Tivoli Storage Manager server using the 'change password' command and then either change or remove the password value in your options file. |
Explanation: Your Tivoli Storage Manager password has expired. You need to change your password.
System Action: Processing ends.
User Response: Obtain a new password for your Tivoli Storage Manager server; node using the change password command or by asking your Tivoli Storage Manager Administrator to change your password.
ANU0257E | Your password has expired. |
Explanation: Your Tivoli Storage Manager password has expired. A new password needs to be obtained.
System Action: Processing ends.
User Response: Obtain a new password for your Tivoli Storage Manager node using the change password command or by asking your Tivoli Storage Manager Administrator to change your password.
ANU0258E | You did not enter a valid password. Processing ends. |
Explanation: The password that was entered was not a valid password.
System Action: Processing ends.
User Response: Re-enter the command specifying a valid password.
ANU0259E | The password you entered for verification does not match the password you entered for your new password. Your password will not be changed. |
Explanation: The password you entered for verification of your new password does not match the new password that was entered.
System Action: Processing ends.
User Response: Try again to change your password being sure to enter the same password for the new password and for the verification password.
ANU0260I | Password successfully changed. |
Explanation: The change password command completed successfully
System Action: Processing ends.
User Response: None
ANU0261I | There are no backups for the server named servername. |
Explanation: There are no backups on the Tivoli Storage Manager server for the specified server name.
System Action: Processing ends.
User Response: None
ANU0263E | Failed to start Web browser with a return code of returncode. |
Explanation: An attempt was made to start the web browser to view the TSM HTML b ook. This attempt failed.
System Action: Processing ends.
User Response: Start your web browser manually and point it to bookfrm.htm in the agent htm directory.
ANU0264I | Could not find the default browser defined. An attempt will be made to use Microsoft Internet Explorer. |
Explanation: An attempt was made to read the registry to determine the default browser. However, a default browser is not defined. A determination will be made where Microsoft Internet Explorer is installed.
System Action: Processing continues.
User Response: It is possible that a default browser is not defined for the system. This is okay. An attempt will be made to use Microsoft Internet Explorer.
ANU0265E | Could not find Internet Explorer. |
Explanation: An attempt was made to read the registry to determine where Microsoft's Internet Explorer was installed. This attempt failed.
System Action: Processing ends.
User Response: Make sure that the registry is set up correctly for Internet Explorer.
ANU0266E | Could not find the Tivoli Storage Manager HTML books. |
Explanation: An attempt was made to read the registry to determine where the Tivoli Storage Manager books were installed. This attempt failed.
System Action: Processing ends.
User Response: It may be necessary to reinstall the application client code. This will ensure that the registry entries are set up correctly.
ANU0267E | The verify password entered does not match the new password entered. |
Explanation: The verify password does not match the new password.
System Action: Processing ends.
User Response: Retry the command with a matching verify password.
ANU0300E | Invalid restore type. |
Explanation: The type of restore requested is invalid.
System Action: Processing ends.
User Response: Re-enter the command specifying a valid restore type.
ANU0301E | Invalid backup type. |
Explanation: The type of backup requested is invalid.
System Action: Processing ends.
User Response: Re-enter the command specifying a valid backup type.
ANU351E | Invalid trace keyword - 'keyword' |
Explanation: A TRACEFLAG option in the user configuration file or on the command line is incorrect.
System Action: Client program did not initialize or tracing was not enabled in the applet.
User Response: Correct the value.
ANU357E | Unable to open trace output file file-name. |
Explanation: A TRACEFILE option in the user configuration file or on the command line used a directory path and file-name combination to which you do not have write access.
System Action: Client program did not initialize.
User Response: Change the TRACEFILE value so that it is a location to which you have write access.
ANU366E | Unable to close trace output file file-name. |
Explanation: An error occurred during the closing of a trace output file-name (for example, not enough disk space).
System Action: Processing continues.
User Response: Check the options.doc file for a description of possible causes of the error, or see your system administrator.
ANU367E | Unable to write to trace file tracefile. Tracing disabled. |
Explanation: An error occurred when writing to the specified tracefile.
System Action: Tracing is disabled. Processing continues.
User Response: Ensure the device that the tracefile access is available and has sufficient space for the tracefile. Retry the command.
ANU368E | Invalid trace file name (name too long). |
Explanation: A TRACEFILE option in the preferences files used a file name that is too long.
System Action: Client program did not initialize.
User Response: Change the file name used as the TRACEFILE so that it is equal to or less than 255 characters in length.
ANU383E | Specifying the trace file 'link' as a symbolic link is not allowed. |
Explanation: Trace file 'linkname' cannot be a symbolic link.
System Action: The symbolic link 'linkname' is deleted, the trace file is recreated, and processing stops.
User Response: Specify the trace file location with the 'tracefile' option.
ANU384E | Symbolic link 'linkname' to 'target' was successfully deleted. |
Explanation: Log 'linkname' cannot be a symbolic link.
System Action: The symbolic link 'linkname' is deleted, the log is recreated, and processing stops.
User Response: Check the location of the new file. To specify the location of log files, refer to the user's manual for the 'errorlogname' option, the 'schedlogname' option, and the 'DSM_LOG' environmental variable.
ANU385E | Unable to delete symbolic link 'link'. |
Explanation: Log 'linkname' cannot be a symbolic link.
System Action: Processing stops.
User Response: Delete the symbolic link 'linkname'.
ANU476E | program-name: cannot open file file-spec: error. |
Explanation: TDP cannot open the file.
System Action: TDP cannot complete the requested operation.
User Response: Retry the operation. If the problem continues, check with your system administrator.
ANU2500E | Oracle passed an invalid mode |
Explanation: Invalid mode passed by Oracle.
System Action: The system returns to the calling procedure.
User Response: Contact your system administrator.
ANU2501E | Oracle passed a null file name |
Explanation: Null file name passed by Oracle.
System Action: The system returns to the calling procedure.
User Response: Contact your system administrator.
ANU2502E | Wrong data block size |
Explanation: Wrong data block size.
System Action: The system returns to the calling procedure.
User Response: Contact your system administrator.
ANU2503E | Backup object 'filespacehlll' already exists on TSM Server. |
Explanation: The object has previously been backed up to the TSM Server.
System Action: Data Protection for Oracle returns to the calling procedure.
User Response: If backing up an object, make sure Oracle is generating a unique backup object name.
ANU2504E | Dissimilar Oracle handle |
Explanation: The handle passed from Oracle is not the same handle that TSM passed back.
System Action: The system returns to the calling procedure.
User Response: Contact your system administrator.
ANU2505I | End of file reached |
Explanation: End of file reached.
System Action: The system returns to the calling procedure.
User Response: None.
ANU2506E | Wrong Read State |
Explanation: The operation must be in READ state.
System Action: The system returns to the calling procedure.
User Response: Contact TSM support.
ANU2507E | Runtime API version is outdated |
Explanation: Runtime API is lower than compile time API.
System Action: The system returns to the calling procedure.
User Response: Check compile time API level, obtain same or higher level of API library.
ANU2508E | Wrong write state |
Explanation: The operation must be in WRITE state.
System Action: The system returns to the calling procedure.
User Response: Contact TSM support.
ANU2509E | Invalid flag passed |
Explanation: Oracle passed an invalid flag.
System Action: The system returns to the calling procedure.
User Response: Contact your system administrator.
ANU2510E | The Caller must be a root user |
Explanation: Only a UNIX root user can execute password
System Action: The system returns to the calling procedure.
User Response: Contact your system administrator.
ANU2511E | Reduce the number of copies to that specified in RMAN |
Explanation: The duplex copy feature has reached maximum allowed copies.
System Action: The system returns to the calling procedure.
User Response: Reduce the number of backup copies to that allowed by RMAN.
ANU2512E | Could not open license file: license file |
Explanation: The license file could not be opened.
System Action: The system returns to the calling procedure.
User Response: Check that the license file exists with the correct permissions.
ANU2513E | Could not read license file: license file |
Explanation: The license file could not be read.
System Action: The system returns to the calling procedure.
User Response: Check that the license file permissions are correct.
ANU2514E | Could not write license file: license file |
Explanation: The license file could not be written.
System Action: The system returns to the calling procedure.
User Response: Check that the license file permissions are correct.
ANU2515E | Invalid data format in license file: license file |
Explanation: The license file data format is invalid.
System Action: The system returns to the calling procedure.
User Response: Reinstall the license that came with Data Protection for Oracle.
ANU2516E | Bad checksum of license file: license file |
Explanation: The license file has a bad checksum.
System Action: The system returns to the calling procedure.
User Response: Reinstall the license that came with Data Protection for Oracle.
ANU2517E | Try and Buy Evaluation period is over for license file: license file |
Explanation: The Try and Buy Evaluation period is over.
System Action: The system returns to the calling procedure.
User Response: Purchase the product or discontinue use.
ANU2518E | License file: license file not valid for this application |
Explanation: The license file is not intended for this application.
System Action: The system returns to the calling procedure.
User Response: Reinstall the license that came with Data Protection for Oracle.
ANU2519E | Could not read password |
Explanation: There is an invalid password or the password file cannot be not found.
System Action: The system returns to the calling procedure.
User Response: Check that password file exists and is valid.
ANU2521E | Error opening file name. Check permissions. |
Explanation: A directory could not be created.
System Action: The system returns to the calling procedure.
User Response: Check that permissions allow the creation of directories.
ANU2522E | No memory available |
Explanation: There is not enough system memory to complete the action.
System Action: The system returns to the calling procedure.
User Response: Make more system resources available by closing other applications, then try the action again.
ANU2523E | The Management Class does not match |
Explanation: The management class for the query object could not be found.
System Action: The system returns to the calling procedure.
User Response: Contact your system administrator.
ANU2525E | Input date does not match expected date format or range. |
Explanation: The input date does not match the expected date format or range.
System Action: The system returns to the calling procedure.
User Response: Check that the format and length of the date entry matches TDP_DATE_FORMAT type and the range of the date values are valid.Valid days are: 1-31Valid months are: 1-12Valid years are:1990-2089
ANU2529E | To Date cannot occur before From Date |
Explanation: The specified To Date occurs before From Date.
System Action: The system returns this error.
User Response: Enter a valid To Date that occurs after the From Date.
ANU2530E | Screen size is too small to accurately display the PICK window. |
Explanation: You cannot use the PICK option on a workstation that has a screen smaller than 20 characters across and 10 lines down.
System Action: The operation was not completed.
User Response: Retry the operation using a workstation that has a screen with the minimum size.
ANU2531E | Could not create file for Data Protection for Oracle utility |
Explanation: The temporary file could not be created.
System Action: The system returns to the calling procedure.
User Response: Check the status of the filespace.
ANU2532E | Unknown Error - View the Data Protection for Oracle error log |
Explanation: There was an unknown error. View the tdpoerror.log.
System Action: None
User Response: None
ANU2533E | SQLPLUS error |
Explanation: The utility could not find SQLPLUS or there was a scripting error.
System Action: The system returns to the calling procedure.
User Response: Check that SQLPLUS is installed and located in your search path. Verify the password.
ANU2534E | Option file error. |
Explanation: The option or option file name is invalid.
System Action: The system returns to the calling procedure.
User Response: Check the tdpoerror.log file for an explanation of the error.
ANU2535I | File /fs/hl/ll = number bytes sent |
Explanation: This is the total bytes sent to the server for that file name
System Action: The system returns to the calling procedure.
User Response: Check the TSM Server activity log.
ANU2536I | File /fs/hl/ll = number bytes recieved |
Explanation: This is the total bytes received from the server for that backup file name.
System Action: The system returns to the calling procedure.
User Response: Check the TSM Server activity log.
ANU2537E | Error found while parsing options in Data Protection for Oracle options file. |
Explanation: There was an error found while parsing the Data Protection for Oracle options file.
System Action: The system returns to the calling procedure.
User Response: Check that the options and the options file are valid.
ANU2538E | Error found while initializing tracing for Data Protection for Oracle. |
Explanation: Error found while initializing the Data Protection for Oracle trace facility.
System Action: The system returns to the calling procedure.
User Response: Contact your system administrator.
ANU2539E | Function Name: Error - string pointer is NULL. |
Explanation: A NULL pointer was passed to Data Protection for Oracle.
System Action: The system returns to the calling procedure.
User Response: Contact your system administrator.
ANU2571E | Could not load the library: library Data Protection for Oracle |
Explanation: Library cannot be loaded.
System Action: The system returns to the calling procedure.
User Response: Check that the library exists.
ANU2600E | There is no Registry entry for the TSM API. |
Explanation: The Windows Registry entry was not found.
System Action: The system returns to the calling procedure.
User Response: Check that the TSM API is installed correctly.
ANU2601E | There is no Registry entry for the Data Protection for Oracle install path. |
Explanation: The Registry Entry for the Data Protection for Oracle install path was not found.
System Action: The system returns to the calling procedure.
User Response: Check that Data Protection for Oracle was installed correctly.
ANU2602E | The object Filespace NameHigh Level NameLow Level Name was not found on the TSM Server |
Explanation: The object name was not found on the TSM Server.
System Action: The system returns to the calling procedure.
User Response: Check that the object name is correct and that it exists on the TSM Server.
ANU2603E | The option Option Name in file Filename is invalid. |
Explanation: An incorrect option was passed into the Data Protection for Oracle options file.
System Action: The system returns to the calling procedure.
User Response: Verify that your options are correct in the Data Protection for Oracle options file.
ANU2614E | Invalid sequence of function calls to Data Protection for Oracle |
Explanation: Data Protection for Oracle received a function call from Oracle that is out of sequence.
System Action: Data Protection for Oracle returns to the calling procedure.
User Response: Contact Oracle or Data Protection for Oracle support.
ANU2615E | Options file 'filename' not found. |
Explanation: The option file name specified could not be located.
System Action: The system returns to the calling procedure.
User Response: Ensure that an option file exists in the default path or that the user specified option file is valid.
ANU2616E | Empty parameter specified for option 'option' in options file 'filename'. |
Explanation: The option specified must have a parameter supplied.
System Action: The system returns to the calling procedure.
User Response: Ensure that a valid parameter for the given option is entered and valid.