Artificial Organs; Biomechanical Phenomena; Manufactured Materials; Materials Testing; Plastics
- Additve Manufacturing for Medical Research - M3dRES
Research Area: The M3dRES project aims at establishing a unique infrastructure devoted to 3d-printing for medical research in a strongly interdisciplinary environment.
- Cardiovascular Dynamics and Artificial Organs
Research Area: The Working Group deals with investigation, development and simulation of cardiovascular devices and hemodynamics for diagnostic and therapeutic tools.
- Ludwig Boltzmann Institute for Cardiovascular Research
Research Area: The Ludwig-Boltzmann-Cluster for Cardiovascular Research focuses on interdisciplinary research of therapies for cardiovascular diseases.
Mechanical characterization of small blood vessels and vascular grafts
Small diameter blood vessel substitutes require special materials, structures and mechanical behavior to ensure long term functionality. Our group is developing vascular grafts using the electrospinning process which creates constructs out of nanostructured polymer fibers, thus mimicking the structure of the cell surrounding. The mechanical properties can be influenced by electrospinning parameters, fiber orientations and materials. The biomechanical characterization of blood vessels in vitro is not only important as basis for design and production of blood vessel substitutes but also for the investigation of various vascular diseases and for the development of mathematical models.
Techniques, methods & infrastructure
Mechanical Characterization of Soft Tissue and Vascular Implants
Testing procedures to analyze mechanical behavior of tissue, vasculature and prostheses are available in our lab. Two measurement systems cover a wide measurement range. A BOSE ElectroForce testbench system with a 200N Linear motor (Bose Corp. MN, USA) is used for lower forces (0.01 N – 200 N) and high dynamic measurements (up to 100 Hz). A conventional tensile testing apparatus (Beta 10-2.5, Messphysik GmbH, Fürstenfeld, Austria) with contactless strain measurement is used for larger specimen and forces.
- Stoiber, M. et al., 2015. A method for mechanical characterization of small blood vessels and vascular grafts. Experimental Mechanics, 55(8), pp.1591-1595. Available at: http://dx.doi.org/10.1007/s11340-015-0053-x.
- Weiser, C. et al., 2017. Feasibility of profound hypothermia as part of extracorporeal life support in a pig model. The Journal of Thoracic and Cardiovascular Surgery, 154(3), pp.867-874. Available at: http://dx.doi.org/10.1016/j.jtcvs.2017.03.055.
- Stoiber, M. et al., 2013. An Alternative Method to Create Highly Transparent Hollow Models for Flow Visualization. The International Journal of Artificial Organs, 36(2), pp.131-134. Available at: http://dx.doi.org/10.5301/ijao.5000171.
- Juraszek, A. et al., 2014. The influence of bicuspid aortic valves on the dynamic pressure distribution in the ascending aorta: a porcine ex vivo model. European Journal of Cardio-Thoracic Surgery, 46(3), pp.349-355. Available at: http://dx.doi.org/10.1093/ejcts/ezu055.
- Stoiber, M. et al., 2009. A Passive Magnetically and Hydrodynamically Suspended Rotary Blood Pump. Artificial Organs, 33(3), pp.250-257. Available at: http://dx.doi.org/10.1111/j.1525-1594.2009.00715.x.